Pfeil Large Fishtail Sculpture Tools
Pfeil Large Fishtail Sculpture Tools are used for working on large pieces, with a Hornbeam handle, ergonomic design and heavy duty ferrules.
Please note: The Series 1 Fishtail Sculpture Tools are single bevel.
Henry Taylor Sculpture Tools - Set of 10
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Please note the picture still shows the original set of 11 - the set now does not include the large spoon bent gouge.
Pfeil Sculpture Carving Knives - Set of 4
The Pfeil Sculpture Carving Knives are a set of 4 carving knives in a case which includes:
Large Schalle knife
Small Schaller knife
Large Canard knife
Small Canard knife
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Pfeil Medium Sized Tools - V Tools
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D12 (60°) V Tool: 2mm, 4mm, 6mm and 8mm.
The D14 (55°) Soft V Tool is 6mm wide.
The D15 (45°) V Tool is 3mm wide.
Pfeil Medium Sized Tools - Set of 18
Pfeil Medium Sized Tools - Set of 18 comes in a beechwood box and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
12 x Gouges:
Series 2 - 12mm (D2-12),
Series 5 - 3mm (D5-3) & 8mm (D5-8) & 12mm (D5-12),
Series 7 - 4mm (D7-4) & 14mm (D7-14),
Series 8 - 7mm (D8-7) & 10mm (D8-10),
Series 9 - 5mm (D9-5) & 10mm (D9-10),
Series 11 - 1mm (D11-1) &3mm (D11-3);
1 x Spoon Gouge: Series...
Hamlet Beading & Parting Tools
These beading and parting tools are used primarily for forming beads and spigots, these tools can also perform the standard parting tool tasks such as cutting through and forming shoulders.
Crown Tools Revolution Texturing Tool
The Crown Tools Revolution Texturing Tool fits directly into the 1/2'' (13mm) collet of the Revolution Handle and is supplied with a 18 tooth texturing wheel.
The blade has an indexing line scribed down the centre to allow the use of Crown Tools Indexing Tool. Adding the Indexing Tool with the appropriate Spiralling Wheels available offers full spiralling capabilities.
Crown Tools Revolution Indexing Tool
Crown Tools Revolution Indexing Tool is used with the Texturing Tool.
Crown Tools Dovetail Cutting Tool
In 2001 Stiles and Bates ground some of their 1/2'' scrapers to this profile for a course they were running.
Crown Tools followed suit so you lovely people can also benefit from S&B's innovation.
So this is not a new idea but from what Dave Bates has shared with us, this tool is more useful than other dovetail tools as it will cut both internal and external dovetails on bowls...
Crown Tools Bead Forming Tool
The Crown Tools Bead Forming Tool is used for accurately cutting beads which are identical each time.
Sharpen across the top with an oilstone or diamond hone.
Available in two sizes, 1/4'' (6mm) and 3/8"' (10mm)
M2-HSS (High Speed Steel)
Stained beech handle. Walleted.
Flexcut Parting Tools
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Pfeil Medium Sized Tools - Series 9
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Lino & Block Cutting Tools - Sets of 6
Pfeil Lino & Block Cutter Tools - Sets
Pfeil Lino & Block Cutting Tools - Individual
Pfeil palm handled tools for lino and block cutting available in wide range of sizes. These tools are the same high quality as the basic carving tools.
Precisely ground and polished.
Pear handles, 70mm blade length, 125mm overall length
Please see the larger images for the shape of the tool.
Mappa Tools Resin Infused Blocks
These wooden blocks have been impreganted with a coloured resin. The resin infusing process makes the blanks stable and strong all the way through.
Ideal for use as pen blanks, knife scales/handles, knobs etc.
Approximate size: 140 x 46 x 42mm.
4 sides sanded, 1 side with a light polish
Available in Curly Maple and Mappa (also known as) Poplar Burr, and a selection of colours.
Pfeil Medium Sized Tools - Straight Chisel - Series 1
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium D1 Straight Chisels are available with widths of 5mm, 8mm and 12mm.
Bead Forming Tools - 835H
Bangles and curtain rings are just two of the projects which can be undertaken with the use of Robert Sorby ring cutting tools. They can also be used to adorn stems with captive rings. Unlike some simular tools, the original Robert Sorby ring cutting tools are designed in such a way that sharpening and repeatability are not compromised.
All tools are supplied with full use and sharpening instructions.
Carving Tools Set - 6 Tool Starter Set from Henry Taylor - Sheffield
The starter set comes with a little booklet which guides you through a simple relief project written by renowned carver Jeremy Williams.
All the tools come with the unique Acorn branding on the octagonal beech handles.
The 6 tools in the set are
- Flat carving chisel 6mm wide
- Shallow gouge (No.3) 6mm wide
- Medium gouge (No.5) 8mm wide
- V (parting) tool (No.39) 6mm wide
- 6mm...
Pfeil Lino & Block Cutting Tools - Set of 12
Pfeil Lino & Block Cutter Tools - Sets
Pfeil Medium Sized Tools - Series 5
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Hamlet Parting Tools
Parting tools are mostly used for cutting through or forming shoulders, and are essential in any workshop. The 1/8 parting tool (HCT 090) is a popular starter tool.
Crown Tools Pro PM Bowl Gouge
The Pro-PM is an exclusive range for Crown Tools and is the elite if all turning chisels.
Made from advanced Power Metal, the molten steel has been compressed and sintered giving the Pro-PM turning tools a cutting edge which Crown Tools claim will last up to four or five times that of a conventional High Speed Steel tool.
The chisels are hardened to between 66 degree and 69 degree Rockwell, enabling...
Beading Tool Set
Robert Sorby bead forming tools to cut perfect semi-circular beads every time.
The nose design permits multiple bead designs.
This ia a boxed set of 5 RS-835H Bead Forming Tools 1/8", 3/16", 1/4", 5/16" & 3/8" .
Robert Sorby Standard Parting Tools
Robert Sorby standard parting tools are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" (3mm) tool reduces the amount of waste, vital if the timber is an expensive, exotic one.
It also makes for a fine detailing tool, e.g. beads and fillets.
Pfeil Medium Sized Tools - Series 8
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 11
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Mappa Tools 16oz Round Mallet
These mallets, or bottle hammers, from Mappa Tools in the Netherlands are a good weight at 500g (16oz).
Perfect for fine chisel work. It is a tool for the woodworker who likes precision. Mappa Tools have received positive feedback from their customers, saying the mallet feels good and solid with good balance.
Polished finish
Total length: 215mm
Head length: 90mm
Head diameter: 58mm
Pfeil Series 13 - 90° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
90°
Crown Tools Thin Parting Tool - 1/16'' (1.6mm)
This is Crown Tools Thin Parting Tool, width 1/16''.
Thin parting tools allow for very fine parting which is useful where you need the grain to match ie boxes, vases etc.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr which cuts a cleaner edge.
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.
Crown Tools Standard Parting Tool - 1/8'' (3mm)
Parting Tools are essentially used for parting, creating beads and spigots etc on spindle work.
There are a number of profiles. The standard parting tool is made from a simple rectangular bar from 1/8'' to 3/8'' - we have the 1/8'' available.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr...
Pfeil Medium Sized Tools - Skew Chisel - Series 1S
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium D1S Skew Chisel is available with widths of 5mm, 8mm and 12mm.
Pfeil Medium Sized Tools - Set of 12
Pfeil Medium Sized Tools - Set of 12 comes in a display stand and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
7 x Gouges:
Series 5 - 3mm (D5-3) & 8mm (D5-8),
Series 8 - 7mm (D8-7),
Series 9 - 5mm (D9-5),
Series 9 - 10mm (D9-10),
Series 11 - 1mm (D11-1) & 3mm (D11-3);
1 x Spoon Gouge: Series 8 - 7mm (D8-7);
2 x 60° V-Tool: 2mm (D12-2), 8mm (D12-8).
PEC Tools 6' Solid Square
The PEC Tools 6" Solid Square has a 6" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Pfeil Medium Sized Tools - Series 3
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Long Bent Gouge
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D7L Series 7 Long Bent Gouge is available in 10mm width.
Pfeil Medium Sized Tools - Set of 4
Pfeil Medium Sized Tools - Set of 4 come in a plastic slip case and includes:
1 x Chip Carving Knife;
1 x Straight Chisel: 8mm (D1-8);
1 x Gouge: Series 8 - 7mm (D8-7);
1 x 60° V-Tool: 6mm (D12-6).
Size 260 x 130mm
Weight 160g
Pfeil Series 15 - 45° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
45°
Robert Sorby Fluted Parting Tool
This Robert Sorby fluted parting tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes...
Hamlet 3/16'' Diamond Parting Tool
The Hamlet diamond parting tool is not made from diamonds, sorry to disappoint! It refers to the diamond shaped profile which reduces friction, and therefore heat to avoid unwanted burn marks, or even splitting. The shape also reduces the risk of binding in the cut.
Pfeil Palm Carving Tool Sets
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12,...
Mappa Tools Screwdriver
The Mappa Tools Screwdriver with a resin impregnated handle. The resin infusing process makes the handles stable and strong, but it also gives you a beautiful long lasting finish. Available with a Curly Maple or African Blackwood handle.
Robust firm grip. Equipped with a Wera bit holder.
Length wooden part: 103 mm.
Total length: 137 mm.
Thickness: 34mm.
Pfeil Palm Carving Tools
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12, B8/10,...
Henry Taylor No.39 60° 'V' Parting Tools
10% discount from price shown. Whilst stocks last!
Robert Sorby Texturing Tool
This Robert Sorby Texturing Tool is a remarkable adaptation of an engineer's knurling tool. It consists of a handle, blade and a double bevelled texturing cutter with integral bearing.
It can be used to create unique effects that alter the tactile and visual qualities of your bowls, hollow forms, goblets or boxes perfect for adding that individual mark to your work. Orange peel, striated and...
Ashley Iles Pole Lathe Tools - Set of 6
A set of 6 of the most popular pole lathe tools from Ashley Iles. These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So these chisels and gouges are designed...
Henry Taylor Veining Tools
10% discount from price shown. Whilst stocks last!